ET91 2.4 MHz Level Test Meter
FOUR INSTRUMENTS IN ONE
- Level Meter, for selective and wideband level measurements with auto ranging
- Generator, for the generation of measuring voltage for the test of FDM systems
- Bridge, for the measurement of input and output parameter
- Spectrum Analyser, for the test of output PSD, cross-talk and other interference signals
LEVEL METER
- Comfortable receiver frequency setting modes like: CARRIER+TONE or CARRIER-TONE
- Special generator (Tx) frequency tracking modes like: CARRIER+Tx or CARRIER-Tx
- In selective receiving mode five special bandwidths: 20, 200, 1740, 1950 and 3100 Hz
- Selective level measurement of multi tone test signal (MTTS)
GENERATOR
- Generation of quartz accurate test signal with a resolution of 1 Hz
- Generation of multi tone test signal (MTTS)
- Generation of test signal in sweep mode
BRIDGE
- LCL balance versus frequency
- Impedance versus frequency
- Return Loss versus frequency
NOISE LEVEL METER
- Psophometric noise measurement in speech channels according to ITU-T Rec. O.41
- Wideband noise measurement with 8 selectable filters
- Long time impulse noise measurement up to 72 hours
END to END MEASUREMENTS
- Master-Slave cable parameter measurement like: Loss, Balance, Impedance, Ret. Loss and XTALK
- Group Delay Distortion
- Micro Interruption
- Phase Jitter & Frequency Error Measurement
DISPLAY
- 320 x 240 dot graphic LCD display with backlight
- Selectable English, German or Russian languages